Solid State Relay - CD3000S 1PH
£1.00
Part Number:
CD3000S 1PH
Older style solid state relay (SSR), CD3000S-1PH designed for simple on/off type single phase resistance loads. Now superseded by REVO-S 1PH.
Available in 16 current ratings from 10A to 700A, the CD3000S-1PH unit has the option of logic (SSR), 110/230VAC (15 to 110A only) or DC linear input (25A to 110A only) and a choice of zero cross firing or burst firing
Firing Range
Zero Cross (ZC), Burst Firing (BF) with analogue input and 45A to 110A only
Communication
None
Option
Heater Break Alarm
Ideal For
Normal Resistance, Medium & Long Wave IR load types

Product Name | Solid State Relay - CD3000S 1PH |
---|---|
Current Range All Others | 2x10A, 15A, 25A, 35A, 45A, 60A, 90A, 110A, 125A, 150A, 200A, 300A, 400A, 500A, 600A, 700A |
Software | No |
Firing Range | Zero Cross (ZC), Burst Firing (BF) with analogue input and 45A to 110A only |
Input Signal | DC logic (SSR), 4-20mA, 0-10Vdc, 110Vac, 230Vac |
Communication | None |
Feedback Type | Open loop |
Option | Heater Break Alarm |
Ideal For | Normal Resistance, Medium & Long Wave IR load types |
Approvals | CE + EMC approved |
Altitude | Over 1000m of altitude reduce the nominal current of 2% for each 100m |
Auxiliary Voltage Supply | 12:24Vac/dc (required with DC analogue input or Heater Break Alarm unit size 45A to 110A) 90:130Vac 8VA Max |
Controlled Phases | 1 |
Heater Break Alarm | To diagnose partial or total load failure with automatic setup, relay alarm output and LED indication, available as an option |
Humidity | From 5 to 95% but without condensation or the effects of ice |
Mounting | DIN-Rail or Screw mounting |
Load Type | Single Phase (Phase to Phase, or Phase to Neutral) |
Panel Sealing | IP20 |
Storage Temperature | -25 °C to 50 °C Max |
Voltage Power Supply | From 24V to 480V (Std) or 600V as option |
Voltage Frequency | Automatically from 47 to 70 Hz |