Solid State Relay - REVO-S 3PH 690V
Designed to replace contactors, REVO-S (RS3) is a three leg switching of three phase (3PH) solid state relay (SSR), suitable for loads up to 690Vac in delta or star configuration with or without neutral (3 or 4 wire) and available in 14 current ranges with a maximum of 800 amps.
Simplicity coupled with great functionaility, real benefits include:
+ Cost Effective, so the budget doesn't compromise performance.
+ Precision Power Control, with fast and complex firing types.
+ Space Saving Design, making panel space no longer an issue.
+ Clean Electricity, as no interference is produced when switching at zero volts.
+ Lower Maintenance Costs, with increased heater element lifespan.
+ Built to Last, with an expected lifespan of over 10 years.

DOCUMENTATION NOTE: To view and download datasheets / manuals please select the Amp Size required first via the dropdown box above.
REVO-S 3PH is a compact & low cost unit mounted on CD Automation designed heat-sinks, optimised for maximum heat dissipation. Internal fixed fuses on 60A upwards as standard.
The REVO-S thyristor unit also has the option of 4-20mA or 0-10Vdc linear input with Burst Firing set for 4, 8 or 16 cycles. Heater break alarm available as an option.
- Thyristor suitable for resistive, medium or long wave infrared and heater battery loads
- Current sizes available - 60A, 90A, 120A, 150A, 180A, 210A, 280A, 400A, 450A, 500A, 600A, 700A, 800A
- Supply voltage up to 690Vac
- Fully isolated from the power
- Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
- Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
- Constant current drain, independent of supply voltage with SSR input
- Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
- Side by side mounting
- Special design Heatsink with high dissipation value
- IP20 protection
- Complies with CE and cUL specification
- Can be used in conjunction with REVO-PC to provide multi-zone control
Product Name | Solid State Relay - REVO-S 3PH 690V |
---|---|
Software | No |
Firing Range | Zero Cross (SC), Burst Firing (BF) |
Input Signal | DC logic (SSR), 4-20mA, 0-10Vdc |
Communication | None |
Feedback Type | Open loop |
Option | Heater Break Alarm |
Ideal For | Normal Resistance, Medium & Long Wave Infrared load types |
Approvals | cUL and CE + EMC approved |
Altitude | Over 1000m of altitude reduce the nominal current of 2% for each 100m. |
Auxiliary Voltage Supply | 12:24Vac/dc (30A to 210A only with DC Linear input or HBA), otherwise available as follows: 90:130Vac 8VA Max |
Controlled Phases | 3 |
Heater Break Alarm | To diagnose partial or total load failure with automatic setup, relay alarm output and LED indication, available as an option |
Humidity | From 5 to 95% but without condensation or surface ice |
Mounting | Panel Mounting |
Load Type | 3 Phase (4 wire - with neutral) |
Panel Sealing | Please contact us |
Storage Temperature | -25 °C to 70 °C Max |
Voltage Power Supply | From 24V to 690Vac (not 30 to 40A - 600V only) |
Voltage Frequency | Automatically from 47 to 70 Hz |